Vehicle Application Information
All Jackpoint Jackstand bases are the same unless a special order finish is specified. When ordering select the Jackpoint jack pad that is correct for your car. Jackpoint Jackstands are sold in pairs and include one pair of Jackpoint jack pads (2 bases, 2 pads). Some pads will also include rubber insulators and aluminum pins when appropriate.
PLEASE NOTE - YOUR CAR MAY REQUIRE A DIFFERENT PAD FROM THE PAD INDICATED BELOW BASED ON MODEL YEAR, OPTIONAL EQUIPMENT, OR AFTERMARKET MODIFICATIONS. IF YOU ARE UNSURE ABOUT THE CORRECT PAD FOR YOUR CAR Contact us at [email protected] with questions.
RECESSED PAD
The Recessed pad can be used with other manufacturers' jack pads or pucks designed for use with a particular model or vehicle. WHEN USED WITH THE PROPER PAD OR PUCK the Recessed pad may be used with: Corvette C7 and C8 models, Porsche, BMW, Ferrari, Lamborghini, McLaren, Aston Martin, and many vehicles using generic pucks or specialty adapters for lifting. The Recessed pad can also be used with the Jackpoint Foam Blocks on cars that don't have designated under chassis lift points. The Recessed pad can also be stacked with other Jackpoint pads to provide additional height for the jack stands. Please contact us at [email protected] for more information or questions.
BLOCK PAD
The Block pad works with BMW, Mini, Porsche Panamera, and Mercedes cars without the need for an adapter block and cars that lift on the edge of the pinch weld.
TESLA COMPATIBLE PAD
The Tesla Compatible pad was developed for Tesla to work with the Tesla Model S, X, Y, and Model 3. The Standard Pad can also be used if lifting non-Tesla vehicles is anticipated. However, the Tesla pad is designed to work better on the Model 3 and any Tesla with coil spring suspension. This is the same pad used with Jackpoint Jackstands in many Tesla Mobile Service vehicles and Tesla service centers. The Tesla Compatible Pad is also a good application for LUCID vehicles.
STANDARD PAD
The Standard pad is used on vehicles with pinch weld lift points including Audi A3,A4,A5, Lexus, Toyota, Dodge, Ford, Chevy, Nissan, Mazda, Honda, Hyundai, Infinity, and many others. The Standard Pad can be used on TESLA and Porsche vehicles and C5 and C6 Corvettes (with the included rubber insulator and aluminum pin). The standard pad may not clear some factory plastic or aftermarket rocker panel covers. Contact us for details. The Standard pad is also correct for the following vehicles: BMW 3 and 5 series and Mercedes (when used with the optional Adapter Blocks).
LOW PROFILE PAD
The Low Profile pad will not work on pinch welds and is designed for: Porsche 911 - 1987 and later (911 Carrera, 964, 993, 996, 997, 991), Boxster, Cayman, 944. Chevrolet Corvette - C5 and C6. Nissan GTR. BMW 3 series, Audi A6, A7 - (when used with optional Adapters).
Made In the USA
Jackpoint Jackstands are manufactured and hand finished one at a time in Montgomery Illinois. We can ship Jackpoint Jackstands to most countries. Constact us at [email protected] for shipping quotes to destinations outside the USA. Please provide a complete address with postal code for the most accurate shipping quote.